![][1] ![][2] ![][3] ![][4] ![][5] ![][6] **__NOTE: The Diodes and Resistors called out on the Flap Interface Drawing Are NOT included in the installation kit from Avidyne.__** ...
Below are some sample questions dealer's ask during the RMA process. Come back frequently to see new entries: 1) s/n# 20012147 is out of warranty unit or not? Avidyne requires the tail number the unit was installed in. The pilot/owner can purchase an extended warranty through Paul Nelson (pnelso...
When reinstalling the PFD or the MFD, refer to the aircraft installation guides for the pin connectors. Assuming the connectors on a replaced or repaired unit are incorrect, will delay your re-installation of the unit and delivery back to the pilot. For example, Connector J731 is on the back side of the PFD in this...
NEWS** ** July 17, 2019 #### AVIDYNE STREAMLINES _ENTEGRA_ PFD/MFD SUPPORT PROCESS IN THE SPIRIT OF CONTINUOUS IMPROVEMENT #### **_Avidyne demonstrates its commitment to world-class product support and overall customer experience; Significant improvements in support processes being implemented based directly on ...
If performing a Save and restore, unzip the 570-00128-000 Save and Restore Utility. You must use a 2GB or smaller USB, Formatted to FAT Default, before transferring the files. ...
_Intro to IFD interfaces with EFIS systems_ _IFD Interface with Avidyne Entegra_ _Troubleshooting IFD interfaces with EFIS systems_ _Main ARINC429 Config Page_ _VOR/ILS 429 Config Page_ [![][1]][2] [1]: https://hf-files-oregon.s3.amazonaws.com/hdpavidynesupport_kb_attachments/2021/02-03/d931b910...
When installing the DFC90 into an approved aircraft, if you see the Entegra PFD Autopilot Message bar dashed out (see photo), you need to check the configuration of the AutoPilot in the PFD Maintenance Mode pages. Ensure the PFD has MOD55 (mandatory requirement for the DFC90), otherwise the DFC90 cannot communicate wi...