RADAR CONFIGURATION PAGE:
Select Radar Model Type
Select LIO number Based on IFD Unit ID #1 or #2.
Max range, Scan arc, beam width, and 429 stabilization will be unique to the installation.
Notes:
1. If the LIO number does not match the IFD Unit ID you will not be able to calibrate the Radar.
2. If you have Radar enablement on a dual IFD installation both LIO settings must be set related to System the radar is hardwired to. Example - if the #2 IFD is hardwired to the ART2000 both IFDs must be configured for LIO2 or the #1 IFD will get a Radar fail message.
3. While calibrating the radar on the IFD you must calibrate on the hardwired IFD and turn off the cross-side IFD.
