.jpg)
IFD interface to Shadin F/ADC-2000
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD interface to Shadin F/ADC-2000
IFD540/440 Map Orientation - North Up vs Track Up vs HDG Up
The snippet below is taken from the pilot guide, with some added explanation at the bottom. "Pressing the knob cycles through the various map views. The map view selected is indicated at the top of the map next to the heading box. No indication means Heading Up. All other options are labeled next to that heading…
IFD interface to JPI FS450
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD interface to JPI FS450
IFD Interface with E.I. FP-5L
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD Interface with E.I. FP-5L The interface between the IFD and FP-5L fuel computer. Depending on the age o…
IFD Interface with JPI EDM700/730/800/830
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD Interface with JPI EDM700/730/800/830
IFD Dimming setup tutorial
IFD Dimming setup tutorial There are several places in the IFD that dimming control settings will affect the behavior of the backlighting and bezel lights. The 1st place to understand is in normal flight mode, accessible by the pilot, on the "Aux" > "Setup" > "User Options" page, shown below. For both "Bez…
IFD540/440 VHF Weak Tx or Rx
IFD540/440 VHF Weak Tx or Rx If the VHF seems to operate fine on start-up, but gradually get worse over time, it may be a sign that the IFD has inadequate cooling. You can always download the logs from the IFD in question and email them to [email protected] , along with a brief synopsis. If internal tempe…
IFD540/440 Shared Data in Dual installations "Cross-sync"
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. In installations with dual IFDs, the #1 IFD is the "master" and the #2 IFD is the "slave," though data is share…
