.jpg)
Avidyne R9 in Extra aircraft
The Avidyne AutoPilot DFC100 has never been installed/certified on the EA500. Therefore, the DFC100 cannot be added to the stack. Request to move the Extra R9 from 9.3.X to 9.4.X is not approved, inquiries must be directed to Extra. EXTRA Aircraft Maintenance GmbH Schwarze Heide 21, 46569 Hünxe - Germany Office …
IFD5000i Synthetic Vision - SynVis
When upgrading the IFD5000i to the latest release of software shops must confirm the following: 1) you have the Jeppesen NavData (specific for 9.4) installed 2) you must have good GPS coverage - get out of the hangar 3) you must have the R9 checklist installed - new checklist for R9 units are in the Software Tab i…
R9 Config tool
Avidyne Dealers will need to access the dealers website to retrieve the appropriate software config tool. Check the unit software level to determine the correct tool that is required: 9.4 9.3 9.2 9.1
Release 9 to TAS-A interface with release 9.4
Release 9 to TAS-A interface with release 9.4 Config Tool Selection for TAS-A R9 IFD Control and Display Wiring to TAS-A: * TAS-A RS422 - In: J121-24 (Port4 of 0-5, actually the 3rd RS422 port if you're separating the 4 RS422 ports from the 2 RS232 ports 0-1) * TAS-A RS422 - Out: J121-66 (Port4 of 0-5) R9 IF…
