.jpg)
DFC Disconnects
Thank you for your reply and additional information. The most common cause of erratic DFC operation is the Start Voltages of the Roll and Pitch Trim Motors. A good Motor will begin to respond at around 2 Volts. Any voltage beyond 2.5 volts will cause erratic operation of the autopilot. The autopilot is also …
DFC90 Self Test Fail
If you get a self test fail annunciation please have the following completed by an Avidyne dealer. 1. Verify Autopilot is properly seated in its tray. 2. Verify no Autopilot external devices has failed (i.e. trim/servo motors, turn coordinator, autopilot disconnect, trim/servo motor, etc.) If the above reaso…
