I can't put my IFD5XX/4XX into Maintenance Mode from Flight Mode.
If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). If the Download Logs or Update Databases selection is not populated (Example …
GPS Rollover Update Information for Dealers
IFD5XX/4XX AT 10.2.X or Higher For IFD5XX/4XX currently at S/W Version 10.2.X or higher you can obtain the GPS Rollover Software at: Additionally, you can obtain the Service Bulletin for this upgrade at: IFD5XX/4XX AT 10.1.X If your IFD is currently at a 10.1.X or less, please contact your nearest Avidyne dea…
IFD5XX/4XX Compatible Equipment
The IFD5XX/4XX can interface with a host of other avionics equipment. The following list represents proven interfaces. There may be other devices that can be configured the same as one on the below list but Avidyne has not tested it and can therefore not make any compatibility claims. This information is FOR REFEREN…
IFD Interface with JPI EDM900/930
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD Interface with JPI EDM900/930
3.55 L3 NGT9000 Interface with Avidyne IFD5XX/4XX
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. The NGT9000/IFD5xx/4xx interface FAA Approved Data can be found in the NGT9000 STC Installation Manual. …
