.jpg)
AXP340 configuration when interfacing with IFD
ADSB Out Configurations IFD - RS232 out = ADSB(Avi) AXP340 * Squat Switch Source - (If using WOW (Weight on Wheels from IFD540) Pseudo WOW; Low when ground (This will transition @ 30knts GPS ground speed) * GPS Position Source - Trig ADS-B; when connected to IFD540/440 * GPS Line Speed - 9600Bps * System Certi…
EX500/EX600 MFD Software 4.2 FAQ's
For EX600 & EX500 MFD-equipped aircraft: •For ADS-B OUT -Avidyne offers IFD4XX/IFD5XX FMS/GPS navigators for approved GPS position source -AXP340 Panel-mounted or AXP322 Remote-mounted Mode S Transponder -Info below is related to the 4.2 series software; refer to the applicable Install Manual for compatibility an…
3.55 L3 NGT9000 Interface with Avidyne IFD5XX/4XX
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. The NGT9000/IFD5xx/4xx interface FAA Approved Data can be found in the NGT9000 STC Installation Manual. …
AXP340 configuration when an ADS-B receiver is installed
The AXP340 provides ADS-B out when connected to an approved GPS source. The ADS-B stream provides own aircraft location information to the ADS-B Ground Station. The ADS-B Ground Station also needs to know if there is an ADS-B receiver installed. There are two types of ADS-B receivers available. Type 1 = 978MHz al…
