For aircraft with the MFD installed, and the unit is constantly rebooting after the splash screen appears: - Ensure nothing has been changed/modified on the aircraft that would cause this behavior (installing or removing items). - The first line of troubleshooting is to have Compact Flash (CF) card replaced (by a sho...
Pilot may complain they have a message on the MFD that states: Charts (C) Jeppesen Sanderson, Inc: Update Required: January 15, 2020 (see photo). This is a new message now that January 15, 2020 has passed. It occurs when no charts have been added, and the MFD is programmed for CMAX. This message is only addressin...
Issue We are operating and maintaining Piper Seneca V, PA34-220T aircraft, fitted with Avidyne MFD EX5000 and ART2000, Part No.071-01519-0101. We are facing difficulty in the weather radar System, where we are not getting Radar Indication on the MFD. Check the following: The interconnection between RDR2000 and M...
The Skytrax-100B REQUIRES an Altitude Input, even when being used for Weather Data use only. The Altitude Input may be RS-232 or Arinc 429 data format. Even when the "ADS-B" Setting is set to "OFF" the Skytrax-100B will FLAG Itself as INVALID and indicate a RED Led indication without a Valid Altitude Input. This ...
If you are International, and load Americas NavData from Jeppesen, your MFD Maps page will be black, not showing terrain. This is due to the MFD processing a conflict between the coding for International and having the America's loaded. The same goes for Americas programming and adding the International Nav Data from J...