.jpg)
Skytrax-100B Restart Sequence
This article is to address the Restart Sequence required upon the completion of the configuration procedure. Please refer to the Configuration and Verification Interface, Sec 3.7.6 of the Skytrax-100B Installation Manual, P/N 600-00335-000 as a reference to the Skytrax-100B set-up procedures. Upon the completio…
Skytrax 100B Laptop Interface Presentation
For drivers and additional information on the connecting to the ST100B or ST200 with Windows 10, check out the article: Skytrax 100B and SkyTrax 200 Device Drivers
Skytrax 100B USB to USB C Cable
The Skytrax100B does not come with the USB to USB-C cable, these cables can be purchased from Amazon.
Skytrax 100B Altitude Input
The Skytrax-100B REQUIRES an Altitude Input, even when being used for Weather Data use only. The Altitude Input may be RS-232 or Arinc 429 data format. Even when the "ADS-B" Setting is set to "OFF" the Skytrax-100B will FLAG Itself as INVALID and indicate a RED Led indication without a Valid Altitude Input. This…
