.jpg)
IFD interfaced with ART2000/2100
The RDR 2000 system can be configured at installation to include the Target Alert feature (Configuration Module CM2000 must be configured properly). The purpose of the feature is to alert the pilot to the presence of a significant weather cell that exists beyond the currently selected range. For this mode to be activ…
IFD Displays "Configuration Error- IFD Requires Service " After Software Update
It has been reported on rare occasions that this CAS message appears in Flight Mode after performing a software upgrade: IFDs may show all indications of a successful software update; no red or dashed checksums, all previous configurations in maintenance mode are present, etc. However, this error may still pre…
AXP340 configuration when interfacing with IFD
ADSB Out Configurations IFD - RS232 out = ADSB(Avi) AXP340 * Squat Switch Source - (If using WOW (Weight on Wheels from IFD540) Pseudo WOW; Low when ground (This will transition @ 30knts GPS ground speed) * GPS Position Source - Trig ADS-B; when connected to IFD540/440 * GPS Line Speed - 9600Bps * System Certi…
Important PFD Configurations Record before sending in for RMA
If you are planning on sending in an EXP5000 PFD for repair or exchange through the RMA process. The following configurations are the most significant to record. First you must enter the PFD Configuration Menus by pressing the L1 and L3 Bezel keys and holding until the counter drops to zero. Once in the Configu…
