IFD Sandel SN3500 and SN3308 Interfaces (Training)
This is an embeddedpresentation, powered by.
Error Detected "Data Load Not Authorized
If you encounter the following error during a Jeppesen Database update please review the information below. Error Detected "Data Load Not Authorized" Photo from actual customer The navigation, obstacle, and charts databases are downloaded from Jeppesen, using the Jeppesen Distribution Manager (JDM), to a USB…
IFD Interfaces with L3 NGT Series Transponders
IFD Interfaced with NGT Series Transponders Troubleshooting ADS-B Traffic Interfaced With IFD RS232 Config Page
IFD - Transponder Interfaces (Training)
This is an embeddedpresentation, powered by.
IFD4XX/5XX Demo Mode When Installed in an Aircraft
You're using demo endpoint of Iframely API commercially. Max-width is limited to 320px. Please get your own API key at Please read the attached Service Information Letter 606-00182-026 and be advised that before putting an IFD4XX or IFD5XX in demo mode when the IFD is installed in an aircraft that you must turn off t…
Skytrax 100B Altitude Input
The Skytrax-100B REQUIRES an Altitude Input, even when being used for Weather Data use only. The Altitude Input may be RS-232 or Arinc 429 data format. Even when the "ADS-B" Setting is set to "OFF" the Skytrax-100B will FLAG Itself as INVALID and indicate a RED Led indication without a Valid Altitude Input. This…
IFD4XX/5XX Demo Mode When Installed in an Aircraft
You're using demo endpoint of Iframely API commercially. Max-width is limited to 320px. Please get your own API key at Please read the attached Service Information Letter 606-00182-026 and be advised that before putting an IFD4XX or IFD5XX in demo mode when the IFD is installed in an aircraft that you turn off the AD…
Maintenance Mode PIN removal file and instructions
Starting with IFD4XX/5XX SW release 10.2.4.1 there is an option to "Password Protect" the configuration of the IFD in maintenance mode by setting a PIN which will prevent changing the configuration pages with the exception of the WiFi page and Bluetooth page. You can use the attached file to remove the pin. Once the…
