If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). If the Download Logs or Update Databases selection is not populated (Example …
This is an embeddedpresentation, powered by.
If the IFD is at software release 10.2.6.1 and prior, the serial number can be located in maintenance mode under the Hardware page. If the IFD is at software version 10.3.0.2 or later, the serial number can be found in the Software Status page in Flight Mode. Regardless of software level, the serial number is also lo…
Intro to IFD interfaces with EFIS systems IFD Interfaced with Garmin G500/G600 Troubleshooting IFD interfaces with EFIS systems Main ARINC429 Config Page VOR/ILS429 Config Page
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. The following settings will affect the ability of the EFS 40/50 to display GPS vertical guidance from the IFD s…
If the IFD is interfaced with a GAD29/29B/42/43. There could be an instance where the IFD will display: The first thing that should be checked is the configuration. If the GAD is interfaced with a Garmin AP then the appropriate RS-232 setting should be EFIS/AIRDATA. If the GAD is interfaced to a 3rd party AP, …
IFD Interface with AXP322 Transponder RS232 Config Page
Intro to IFD Interfaces with EFIS Systems IFD Interfaced with Aspen EFD1000 Troubleshooting IFD Interfaces with EFIS Systems Main ARINC429 Config Page VOR/ILS 429 Configuration Page