.jpg)
IFD interfaced to ACK A30 serial encoder
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. IFD interfaced to ACK A30 serial encoder
IFD5xx/4xx interfaced to a GTX330ES and a GDL88
The Following Interface Information is "FOR REFERENCE USE ONLY" and is not FAA Approved Data. Please see the applicable STC Installation manuals, or other Approved documentation for installation approval. Prior to software version 10.2.3.1 This interface will only work with dual IFD's. The GTX330ES will only ac…
Maintenance Mode PIN removal file and instructions
Starting with IFD4XX/5XX SW release 10.2.4.1 there is an option to "Password Protect" the configuration of the IFD in maintenance mode by setting a PIN which will prevent changing the configuration pages with the exception of the WiFi page and Bluetooth page. You can use the attached file to remove the pin. Once the…
IFD Interfaced with Skytrax 100B
IFD Interfaced with Skytrax 100B Troubleshooting IFD ADS-B Traffic Interfaces RS232 Config Page
IFD5xx/4xx displays No TIS-B message (TIS-B in a circle with a line through it)
Open the Attached PDF for more information on TIS-B The No TIS-B indicator is not an error message, just an indication that we are not receiving service to the hockey puck surrounding our aircraft from the ground. We don't suppress any data due to the No TIS-B indication so it is not surprising they are seeing…
IFD5xx/4xx Where To Find Unit Serial Number Information
If the IFD is at software release 10.2.6.1 and prior, the serial number can be located in maintenance mode under the Hardware page. If the IFD is at software version 10.3.0.2 or later, the serial number can be found in the Software Status page in Flight Mode. Regardless of software level, the serial number is also lo…
I can't put my IFD5XX/4XX into Maintenance Mode from Flight Mode.
If you ever need to place an IFD5XX/4XX Series Navigator into maintenance mode you can accomplish by either selecting the Download Logs LSK from the AUX>SYS>Status Software Page or from the AUX>SYS> Status Databases Page (Example Below). If the Download Logs or Update Databases selection is not populated (Example …
IFD Displays "Configuration Error- IFD Requires Service " After Software Update
It has been reported on rare occasions that this CAS message appears in Flight Mode after performing a software upgrade: IFDs may show all indications of a successful software update; no red or dashed checksums, all previous configurations in maintenance mode are present, etc. However, this error may still pre…
