Entegra EX5000 MFD dark map page
If you are International, and load Americas NavData from Jeppesen, your MFD Maps page will be black, not showing terrain. This is due to the MFD processing a conflict between the coding for International and having the America's loaded. The same goes for Americas programming and adding the International Nav Data from…
Skytrax 100B Altitude Input
The Skytrax-100B REQUIRES an Altitude Input, even when being used for Weather Data use only. The Altitude Input may be RS-232 or Arinc 429 data format. Even when the "ADS-B" Setting is set to "OFF" the Skytrax-100B will FLAG Itself as INVALID and indicate a RED Led indication without a Valid Altitude Input. This…
Entegra EX5000 MFD Radar
Issue We are operating and maintaining Piper Seneca V, PA34-220T aircraft, fitted with Avidyne MFD EX5000 and ART2000, Part No.071-01519-0101. We are facing difficulty in the weather radar System, where we are not getting Radar Indication on the MFD. Check the following: The interconnection between RDR2000 and …
Entegra EX5000 MFD - constantly rebooting
For aircraft with the MFD installed, and the unit is constantly rebooting after the splash screen appears: - Ensure nothing has been changed/modified on the aircraft that would cause this behavior (installing or removing items). - The first line of troubleshooting is to have Compact Flash (CF) card replaced (by a s…
Entegra MFD Charts Tab (dealers)
Pilot may complain they have a message on the MFD that states: Charts (C) Jeppesen Sanderson, Inc: Update Required: January 15, 2020 (see photo). This is a new message now that January 15, 2020 has passed. It occurs when no charts have been added, and the MFD is programmed for CMAX. This message is only addressi…
Avidyne Entegra 8.1 Save and Restore Utility
If performing a Save and restore, unzip the 570-00128-000 Save and Restore Utility. You must use a 2GB or smaller USB, Formatted to FAT Default, before transferring the files.
Entegra EX5000 MFD Not Enough Space
Dealers, If you are loading Jeppesen Charts and the MFD shows you the message; Not enough space. This is due to the size of the charts you are adding to the MFD. The Compact Flash (CF) card installed in the MFD is possibly 512MB, and will need to be updated to the 2GB compact flash card. Pilots/owners will need to w…
Entegra EX5000 MFD; Software Request Form
For aircraft with corrupt software cards, shops can request a replacement CF card by filling out the form on the link: Avidyne Software Request Form; EX5000
NEWS - AVIDYNE STREAMLINES ENTEGRA PFD/MFD SUPPORT PROCESS
NEWS July 17, 2019 AVIDYNE STREAMLINES ENTEGRA PFD/MFD SUPPORT PROCESS IN THE SPIRIT OF CONTINUOUS IMPROVEMENT Avidyne demonstrates its commitment to world-class product support and overall customer experience; Significant improvements in support processes being implemented based directly on dealer a…
Entegra EX5000 MFD with Setup tab
Older versions of the Entegra software will not have an AUX tab, the system will have a setup tab as sown in the photo below. Photo #1 To retrieve the serial number of the MFD, power on the MFD, accept all messages and go into flight mode. Navigate to the Setup tab and hold down the L1 and L3 buttons (left side o…
